IH CNC Mills & Machinery

Bench Basics Part 2

Bench Basics Part 2

Back To Bench Basic Part 1

	This is a sidewalk drain. Plastic.

	We placed ours in the front right corner for ease of cleaning.

	Trace an outline of the drain.

	Go at it with the saw and chisel to recess the drain just enough to sink the drain. Do not go all the way thru the table.

	Recessed to proper depth.

	The drain should sit flush.

	Bore a large hole through the rest of the top with a hole saw or jigsaw.

	The completed hole.

	A test fit.
	Go to Bench Basics Part 3